Natural wood veneer door skin is qualified by the machine and the experienced team. The modern high tonnage vacuum molding machine, high pressure heat in the environment, we use the twice molding to make sure whether it has the high quality.
Norm Lead Time :
Quantity(Pieces) | 1 – 10000 | >10000 |
Est. Time(days) | 35 | To be negotiated |
loos packing
pallet packing other packing as client request
Material |
Natural Wood Veneer MDF/HDF Door skin |
Type |
Natural wood veneer,such as Oak, Teak, Ash, Sapele, Maple, Walnut, Beech etc. |
Size |
Length: 1900mm-2150mm Width: 600mm-1050mm Thickness: 3mm-6mm Depth: 8mm-12mm Embossed: 16.8mm |
Density |
>860g/cm3 |
Moisture |
6%~10% |
Finish Type |
Unfinished |
Please note that MR (Moisture resistant) is of a lesser quality and cost compared to BWR grade. While it true that MR plywood can resist a certain degree of moisture and humidity, it certainly cannot be called waterproof. On the other hand, BWR plywood is a waterproof plywood.
MR is an interior grade plywood useful for making indoor furniture (office furniture, furniture where there is less application of water or moisture) while BWR plywood is exterior grade(places like kitchen, bathroom doors, furniture below water tanks or any spot where the surface is directly exposed to sunlight and water .
BWR – Phenol formaldehyde synthetic is used for glueing the plies together. This is a synthetic plastic resin.
MR – Urea formaldehyde resin is used for bonding the plies to each other. UF resin is not considered to be very eco-friendly.